Skip to content
You know that the factory oil filter for your 5.7 Hemi will not last very long, but you don’t want to spend a lot of money on an aftermarket Oil filter either.
We get it. It can be hard finding high-quality products at reasonable prices, especially when there are so many options out there and you’re not sure which one will work best for your engine’s needs.
Our list of the top 7 Oil Filters explicitly designed for your vehicle is here to help! These filters have been tested time and time again by our team of expert mechanics, and we’ve found them all to be highly effective in protecting your engine against harmful contaminants like dirt, dust, sand as well as water and moisture.
Things to Consider Before Buying the Oil Filters for 5.7 Hemi Engine
Manufacturer’s Warranty
Our first consideration is: How long is the manufacturer’s warranty? It may not seem like a big deal to some, but with guarantees that range from 30,000 miles up to 100,000 miles, it is essential to make sure you are buying an oil filter whose manufacturer stands by their product.
Oil Filter Brand
Our next consideration should be the brand of oil filter we were going to use. We wanted a company that built its reputation on quality and reliability. After careful research, we decided these filters would best serve our customers and provide the most outstanding filtration you can find!
Acid Content of Engine Oil
In addition, Examine the acid content of each oil filter. Those not familiar with engine oil contain a chemical called Phosphorus, which will cause two things to happen over time: Corrosion wear and deposit build-up. These deposits can be as much as 2-3% on your engine valves in some cases. It is essential to ensure your oil filter can handle this without damaging your engine.
Flow Rate
Also looked at the Flow Rate of each oil filter. The lower the flow rate, the less oil passes through the filter at any given time. It could potentially lead to a build-up of contaminants over time and eventual engine damage. Look for the filters that provide exceptional flow rates.
So without further ado, let’s get on with the list!
7 Best Oil Filters for 5.7 Hemi: Reviews & Buying Guide
We have extensively reviewed all of the oil filters for 5.7 Hemi on the market:
1. ECOGARD X10232 Premium Cartridge Engine Oil Filter
Looking for a quality oil filter that’s compatible with your Ram 1500 or Jeep Grand Cherokee? Look no further than ECOGARD X10232! This premium cartridge engine oil filter is built to last and can be used with synthetic and conventional oils. Plus, it drives up to 5,000 miles between oil changes – so you can rest assured knowing your vehicle is well taken care of.
ECOGARD X10232 claims to have 2X dirt holding capacity compared to conventional oil filters.
This filter screens out 97% of contaminants such as bits of metal, sand, and carbon before they can cause damage to your engine. Plus, it’s easy to install with included O-rings for housing and cap. Don’t take chances with your engine – trust ECOGARD to keep it running like new.
Pros
- 10,000 Mile Manufacturer’s Warranty
- Lightweight oil filter with metal end caps to protect against corrosion and leaks
- Filters 97% of dirt particles for engine protection
Cons
- Eco guard cannot lock filter holder for 2014 RAM 1500 Ecodiesel.
2. FRAM Ultra Synthetic 20,000 Mile Protection Oil Filter
Are you looking to get the most out of full synthetic oil? Fram Ultra Synthetic can take you there, with its claimed protection up to 20,000 miles. Plus, this filter boasts 99%+ dirt removal efficiency at greater than 20 microns. That means your engine is getting cleaner, longer-lasting protection.
FRAM oil filters are torque tested to withstand adverse conditions. These synthetic oil filters protect older vehicles and top performance for the new engines.
It features a silicone anti-drain back valve to help keep your engine running strong, even under the most strenuous conditions. Plus, SureGrip technology provides an entirely non-slip surface, so you can easily install or remove it without any fuss.
With a premium silicone anti-drain back valve along with dual-layered synthetic media, this Ultra synthetic oil filter can trap and hold dirt like nobody’s business – all while ensuring a safe start-up. So why wait? Get yourself a FRAM Ultra Synthetic 20,000 Mile Protection Oil Filter today!
Pros
- The average filter efficiency is more than 20 microns
- Nitrile ADB claims to have 3X higher functional life than standard rubber
- Successfully tested against extreme weather conditions
Cons
- Some users have complained about the quality of the product and difficulty in installation.
3. MAHLE OX 1145D ECO Engine Oil Filter
MAHLE OX 1145D ECO Engine Oil Filter is designed with your vehicle’s performance and the environment in mind. The OX-Eco filter is made entirely of materials that can be incinerated, so you can feel good about helping the planet every time you change your oil. The stable pleat geometry ensures a smooth cold start, even on those frigid winter mornings.
The efficient pleated filter maintains the low-pressure drop and high dirt holding capacity. The filters also claim to have original materials and designs for higher performance.
This filter features embossing bumps to prevent clogging, as well as a pressure relief valve to ensure your engine always has enough lubrication. It’s easy to install – screw it on, and you’re good to go!
Pros
- It can be incinerated for easy disposal
- Features embossing bumps to prevent clogging
- Dirt holding capacity is relatively high
- Assembly is leak-free
Cons
- Made in China
4. K&N Premium Oil Filter
K&N premium oil filters are the best way to keep your engine running smoothly. Engineered with a pleated synthetic media blend, these filters remove the most harmful contaminants from your oil while providing exceptional flow rates. It is designed to work with all motor oils, including synthetic, conventional, and blended varieties.
You can expect high flow rates even in adverse conditions. It prevents the rolled threads from stripping with its anti-drain back valve. It ensures smoother installation and prevents dry starts.
K&N oil filters are rigorously tested to ensure burst strength. With its wrench-off design, it is easy to install. The heavy-duty canister ensures outstanding durability. They come with a 1-year limited warranty. So if you’re looking for a filter that can withstand the more extended service intervals now recommended by some vehicle manufacturers, K&N is your go-to brand.
Pros
- Filter walls are highly durable
- High GPM flow rates
- It can handle high oil pressure with no issues of bursting
Cons
- Customer complaint about filters does not have plastic sealed as required
5. Mopar 4892339AA Oil Filter
If you’re looking for an oil filter for your 2.4L multi-air motor, you need the Mopar filter. It is the right filter for jeeps and Fiat vehicles manufactured in 2018 or later. The German-owned Fiat company has been ruthless in its business practices, but with this oil filter, you can rest assured that your car will be taken care of.
Mopar filters have a high dirt capacity and excellent filtration. It also features an anti-drain back valve to prevent dry starts on cold days. Plus, its rubber sealing provides excellent protection against any oil leakage upon removal of the filter. It is easy to install on your vehicle with its hex wrench-sized lug nuts for use on flats.
The Mopar 4892339AA oil filter is an excellent choice for those who want an affordable and reliable oil filter for their car. It comes with a one-year limited warranty from the manufacturer.
Pros
- Affordable price
- One-year limited warranty
- High dirt capacity
- Anti-drain back valve
- Well-built
Cons
- Complaints of it being difficult to remove by user
6. Purolator PL14670 PurolatorONE Advanced Engine Protection
This high-quality filter is designed to remove 99% of dirt and debris, while the synthetic blend media helps to ensure optimal engine life.
High-density synthetic blend media gives this filter a unique design to filter out all the debris with high efficiency. Wear-resistant metal end caps ensure that your engine receives the utmost protection between oil changes.
This filter is ideal for harsh driving conditions. If you tow, commute or drive in extreme weather conditions, PurolatorONE is perfect to consider as a premium oil filter for your engine. And when used with synthetic or high mileage oils, you can count on even more advanced engine protection.
Protect your engine with a Purolator ONE Advanced Engine Protection filter today!
Pros
- Protective gear to your engine parts
- new air filters ensure 11% improved acceleration
- Media traps are high density
- Quick and smooth installation
- It comes with quality joints
Cons
- Few customers complaint about receiving damaged products
7. Genuine Mopar 5038041AA Oil Filter
It is a quality oil filter that keeps your engine smoother and lasts longer. It is meant for high-performing vehicles. It can work with extreme conditions.
The filter has a strong sealing ability. It is tested for multiple pressure regimes to ensure 100% leak-free performance. The oil filter comes with an anti-drain back valve to prevent dry starts on low oil levels.
The Mopar 5038041AA Oil Filter has a high filtering capacity that keeps the contaminants at bay. It is easy to install and comes with a 1-year warranty from the manufacturer.
Pros
- Easy installation
- High filtering capacity
- Leak-free performance
- 1-year warranty
Cons
- Some customers complaints about it being difficult to remove
Frequently Asked Questions on Best Oil filters for 5.7 Hemi.
What Brand Oil Filter Does Dodge RAM 1500 Recommend?
There is no one-size-fits-all answer to this question, as the best oil filter for a 5.7 Hemi engine may vary depending on the make and model of your vehicle. However, some famous brands compatible with this engine include K&N, Purolator, and Genuine Mopar.
What is the Best Oil to Use in a 5.7 Hemi?
This engine has a maximum oil capacity of 7 quarts. For best results, check your vehicle’s manual for the minimum weight of oil recommended by the manufacturer.
How often should I Replace my 5.7 Hemi Oil Filter?
Again, this answer depends on several factors, such as how frequently you drive and where you live. However, most experts recommend changing your oil filter every time you change your oil.
How do I know if my 5.7 Hemi Engine needs an Oil Filter?
Generally, if the “low oil pressure” light on your dashboard is on after you start the engine or your car makes annoying noises, it’s a sign that your engine needs an oil filter. Consult with a mechanic to see if this is the case for your vehicle.
Does a High-Quality Oil Filter make a Difference?
A high-quality oil filter significantly boost your vehicle’s performance. A lower-quality filter may cause your engine to overheat or experience pressure buildup, which can be dangerous. For this reason, it’s essential to use only the best oil filters for 5.7 Hemi engines.
How Much Does an Oil Filter Cost?
The price of an oil filter varies depending on the brand and model. In general, standard OEM filters cost around $30-$45 each.
Is it better to Install a new Oil Filter or Reuse an Old Oil Filter?
You should always replace your engine’s oil filter with a new one, as using an old filter can cause engine damage. Reusing an old oil filter can also contaminate your engine with dirt and debris, leading to decreased performance and shortened engine life.
Conclusion
The market is full of oil filters for 5.7 hemi. However, there are a few things that you should consider while buying the best one. It should be compatible and have a high filtering capability to remove all contaminants from the engine. Another essential feature includes quick and smooth installation so that you can replace the filter quickly and start your machine back. Having a follow-up with the manufacturer also helps ensure that you buy genuine products and can claim your warranty in case of any issues.
As we all know the importance of oil filters, we suggest going for a quality filter rather than buying something cheap.
My Name is Christopher Angels, and I am a postgraduate in mechanical engineering. Cars have always excited me as a child, and soon I decided to dive into the world of cars by pursuing mechanical engineering. I also worked as a Mechanic for over 3 years to understand Cars’ anatomy and how each part contributes to its working.
My Name is Christopher Angels, and I am a postgraduate in mechanical engineering. Cars have always excited me as a child, and soon I decided to dive into the world of cars by pursuing mechanical engineering. I also worked as a Mechanic for over 3 years to understand Cars' anatomy and how each part contributes to its working.
