VOLUME XIV,  ISSUE 2 - MARCH - APRIL  2019

mopar memos The latest news, rumours & Info!

NEW PRODUCTS

Shorty Headers from Hooker BlackHeart

Hooker BlackHeart Dodge Charger, Challenger and Chrysler 300 Shorty Headers deliver maximum gains of 14.7 horsepower and 15.7 foot-pounds of torque on the dyno. They're up to 50 percent (16 pounds) lighter than ordinary stock exhaust manifolds and made of 18-gauge mandrel bent 304 stainless steel for factory-like fitment and maximum performance. These headers feature 1-7/8” primary tubes and true mitered merge collectors that maximize exhaust velocity and scavenging while reducing turbulence. They're completely hand-welded, ready to bolt on with no modifications or fabrication required, compatible with factory oxygen sensors and catalytic converters, and come complete with all the necessary fasteners for a fast, easy installation.

Complete S60 Rear Ends from Strange

Strange Engineering offers complete bolt-in and custom S60 rear ends for your street or track car. Strange S60 housing are constructed with strong 3” diameter mild steel tubing and when combined with the premium nodular iron casting, creates a strong, affordable alternative to the Ford 9” housings. The S60 case design features adjuster nuts to provide a precise and easy setup. The larger nodular iron caps and one-piece center casting provide enhanced rigidity and promotes longer gear and differential life. The S60 housings can be ordered in any combination from piece to finished, ready to bolt-in. GM and Mopar applications.

Edelbrock AVS2 Series Carburetors

Edelbrock has announced the AVS2, a high-performance carburetor that delivers drivability with near EFI-like smoothness. The new series is based on the popular Thunder Series AVS utilizing the innovative Qwik-Tune Secondary Air Valve that provides unlimited calibration of the secondary circuit for the most precise tuning across the entire RPM range. Edelbrock engineers managed to make the AVS design even better by adding Annular Flow Booster technology. The AVS2 Series boasts new calibration and delivers superior atomization. This is provided by eight equally spaced orifices in the annular booster rings that replace the standard down-leg boosters that simply dump raw fuel into the venturi. With down-leg boosters, atomization doesn’t happen until after the butterflies, but with AVS2 annular flow boosters, atomization occurs instantly. AVS2 features two-piece aluminum construction with an ease-of-tuning design that lets you change jets, metering rods, springs, or make float level adjustments without draining the fuel from the carburetor or even removing it from the engine.

JEGS Pinion Yoke Wrench

JEGS Ring & Pinion Tools are engineered to work with almost any differential. For either 1350 or 1310 Series U-joints. Fits most GM, Ford, Chrysler or AMC applications. Accepts 1/2-inch or ¾-inch Drive Breaker Bars. 2.171-inch center hole. Made of forged steel.

DEI Oil Filter Heat Shield

DEI’s new Oil Filter Heat Shield can be used to keep oil at its best operating temperature; especially important for vehicles with high performance engines. DEI’s Oil Filter Shield effectively blocks radiant heat that can change the oils viscosity or potentially cause a thermal breakdown that will make the oil additives degrade, dissipate, and wear out quickly. As a long-time specialist in heat control for all forms of motorsports and powersports, DEI made the Oil Filter Heat Shield universal in size so they can be trimmed to fit and used for any size oil filter. Sold as a convenient three pack, they are available in two sizes: 3.5” - 4.5” x 4” (part #010740) or 2.5” – 3.5” x 3” (part #010741).

Red Line RL-600 Brake Fluid

Red Line Synthetic Oil’s RL-600 Full Synthetic Brake Fluid is ready for use in road vehicles, race cars, off-roaders and motorcycles. RL-600 is a DOT 4 brake fluid engineered using a strict combination of Borate Esters and Glycol Ethers, in addition to specific moisture and corrosion inhibitors. RL-600 is developed to resist these issues and maintain lubricity, compressibility and viscosity under the most extreme conditions at the race track or on the street. The fluid has a dry boiling point of 604 degrees Fahrenheit and wet boiling point of 400 degrees Fahrenheit, far greater than the minimum requirement for DOT 4 brake fluids. Additionally, Red Line’s RL-600 can blend with DOT 3, DOT 4 and DOT 5.1 brake fluids, delivering more responsive and consistent pedal feel.

WORX® offers two new cordless solutions to tackle a wide variety of projects including the 20V Multi-function LED Light. LED lights burn cooler than any other type of bulb and last longer too. The new WORX® 20V Multi-function LED Light features five functions including a flashlight, lantern, desk lamp with hi/lo settings, and flashing emergency light. As a flashlight, the 5.6 lb. (with battery) WORX 20V Multi-Function LED Light projects a beam of light that’s the equivalent of 130 lumens. The flashlight beam burns for 18 hours on a single charge of the 1.5 Ah battery. When used as a lantern, the multi-function LED light telescopes and can be placed in a vertical position or angled right or left to 140º.

BACK TO TOP

Connect

official sponsors

 © 1999-2019 - MoparMax.com and Racing Net Source LLC - 607 Seib Drive, O'Fallon, MO 63366 Phone: 636.272.6301 - Privacy Policy