POWERJECTION II
The Powerjection II system includes the intake manifold, extruded aluminum fuel rails, injectors, EFI fuel pump, pre-fuel filter, main fuel filter, Engine Management System (EMS), all sensors, complete wiring harness, fuel pressure regulator and throttle body. All kits come standard with the 1200-CFM 4-bbl throttle body. The optional 2200-CFM Dominator-style throttle body is only available for big-block Chevy applications. Powerjection II kits can be ordered with either a satin or polished finish, and the throttle bodies are available as machined billet or cast aluminum.
The EMS is a self-learning unit that requires roughly 30-minutes of driving to get the air/fuel ratio correct and that's it. No need for a laptop tune, just install and go! However, the system is tunable for those who desire this feature. The computer pulses the electric fuel pump so engines up to 500 HP do not require a fuel return line.
Professional Products has kits available for small and big-block Chevy, small-block Ford and 351W Ford engines. Pontiac and Oldsmobile kits coming soon!
For more information on their complete line of products, or to download the new 2008 Professional Products performance parts catalog, visit www.professional-products.com.
COVERCRAFT COVERS SAVE WATER AND REDUCE POLLUTION
Covercraft Industries’ custom vehicle covers can do much more than just protect your paint and interior, they can also conserve a precious resource: WATER! By using a cover, your car, truck or SUV will stay cleaner and require far less washes to remain that way. Less soap and water will be sent into street drains, which many times run to a river or the ocean, causing more pollution. Using less water will not only conserve this valuable resource but also save you money! So it’s a win situation for you, your vehicle and the environment.
Covercraft Industries has several materials that prevent even the finest dust from penetrating to your vehicle’s surface. These materials also prevent acid rain, bird droppings, UV rays and general contaminants in the air from reaching your vehicle’s interior and exterior. With a library of over 75,000 import and domestic patterns, Covercraft covers are custom tailored to fit your vehicle. They also have covers for motorcycles/ATVs, RVs and personal watercraft. You can select the material which will provide the best vehicle protection for your area at www.covercraft.com.
Flaming River keyed steering columns for Mopars
Flaming River Industries introduces an all-new line of tilt steering columns for Chrysler applications featuring a new Chrysler-style key and tumbler assembly.
The new one-piece key assembly housing is not an “add-on”, and delivers eye-appeal and user convenience. The column-mounted assembly is mounted in the original “Key At 3” (o’clock) location as found on the early-70s classic Chrysler cars. The columns fit Chrysler, Dodge and Plymouth A-bodies (Dart, Duster), B-bodies (Coronet, Daytona, Super Bee, Satellite, GTX, Roadrunner), C-bodies (Monaco, Polara, Fury, Sport Fury), and E-bodies (Cuda, Challenger).
The columns are completely made in the USA, featuring all-new components throughout, including the ignition switch and key assembly. The columns utilize stainless steel tubes and aluminum housings in paintable (mill finish), black powder coat or chromed finishes. The wiring connectors are included to make installation plug and play.
A key feature of the new Mopar column is a slip shaft with the proper universal joint to install to a stock Chrysler manual or power steering box. The Mopar key columns are available only in floor shift models.
For further information, visit www.flamingriver.com.
ProStyle Billet Shifter Sticks
Designed for muscle cars and hot rods that have been converted to modern, internal rail manual transmissions, these new shifter levers compensate for ergonomic issues caused by relocating the shifter from the original side mount position (e.g. Muncie) to the top of the transmission (e.g. Tremec T-56).
CNC-machined from 6061-T6 aluminum, ProStyle adjustable shifter sticks are available in 8-inch straight shank or 10-inch 25-degree bent shank (as shown). Reach is adjusted by way of three interchangeable inserts for up to seven mounting positions. All kits are provided with mounting hardware: 3/8”, 8mm, and 10mm socket head cap bolts to complete the installation.
These new ProStyle levers fit all factory and aftermarket stub-style manual shifters with .875”-.900” bolt spacing. Aftermarket transmissions include all internal-rail Tremec T5, T56, TKO500, and TKO600 and Richmond.
The ProStyle brand name identifies a range of billet aluminum aftermarket accessories for Camaros and other muscle cars. Its styling theme, known as ball-milled and slotted, brings a coordinated styling to other accessories such as core support bars (engine bay reinforcing: fender to front panel), cowl induction trim plates, and more.
Visit the Twist Machine website at www.twistmachine.com for their latest offerings.